MiSTer FPGA Pre-configured Bundle (with Aluminum Armor)
Note: Full kits are made to order. Orders may be delayed due to volume. Backorders are considered final and cannot be cancelled.
Experience the superior performance and protection of the MiSTer FPGA Pre-configured Bundle (with Aluminum Armor). Designed with the passionate user in mind, this bundle has already received rave reviews from satisfied customers all over the world. The case is even used by some of your favorite developers! The industrial-grade DE10-nano FPGA boasts a high max temperature rating of 100C. Trust in the durability and functionality of this top-of-the-line bundle.
Everything you need, pre-assembled and tested, in one tidy package!
No fan. No dust. No noise.
MiSTer doesn't require active cooling. These kits can be left on 24/7 with any core. Core to core temperature variation is minimal.
The case is the heatsink, dissipating internal heat to the exterior.
Features
| Model | Video Output | SDRAM | AV Port | Analog Video |
| IO Analog Pro* | HDMI AND Analog (simultaneous) | 1 | Saturn | RGB/YPbPr/S-Video+Composite |
| IO Direct* | HDMI OR Analog | 2 | Saturn | RGB/YPbPr/S-Video+Composite |
| IO Analog VGA | HDMI AND Analog (simultaneous) | 1 | VGA | RGB/YPbPr |
Includes
- Aluminum passively cooled case
- DE10-nano
- 128MB SDRAM (1x for Analog Pro, 1 x for Analog VGA and 2x for IO Direct)
- IO Board (Analog Pro, Analog VGA or IO Direct)
- USB Hub, bracket
- DC Jumper
- Power
- IO Analog Pro and IO Direct
- Reflex Volt 1C Power Supply or third party PSU (stock dependent)
- (Bring your own USB C power cable)
- Analog VGA (not available for this batch of cases)
- DC Power supply
- Switch + Splitter
- IO Analog Pro and IO Direct
- 32GB micro SD card with all open source files from Github (cores, operating system, cheats, filters, etc.)
- Higher capacity micro SD cards also available here!
Instructions: https://misteraddons.com/pages/guide
Configuration
Please refer to the MiSTer.ini section of the Guide page
Thermal characteristics
These measurements were performed in 2020, just before the case was released. Since that time, thousands have been sold and used all around the world. Rest assured the case provides both adequate cooling and protection. The FPGA used by the DE10-nano has a max temp rating (TJmax) of 100C. It's an industrial-class device and this aluminum armor is the best enclosure for it.
Troubleshooting
Won't boot?
Remove and reinsert the SD card. Ensure you have a 5V 2A (preferably 3A) power supply connected to the USB-C port in the rear. Use the left button to toggle power on or off.
No HDMI video output?
Set direct_video=0 in MiSTer.ini. If using IO Direct, use the BOTTOM HDMI port (DE10-nano output). The top HDMI port is the input for IO Direct's DAC.
USB devices don't work?
Ensure the rear DC power jumper is installed properly. It is required to route power to USB devices.
Upgrading to a larger SD card?
Use mr-fusion to prepare the new card, then copy your files.
MiSTer FPGA Pre-configured Bundle (with Aluminum Armor)
Note: Full kits are made to order. Orders may be delayed due to volume. Backorders are considered final and cannot be cancelled.
Experience the superior performance and protection of the MiSTer FPGA Pre-configured Bundle (with Aluminum Armor). Designed with the passionate user in mind, this bundle has already received rave reviews from satisfied customers all over the world. The case is even used by some of your favorite developers! The industrial-grade DE10-nano FPGA boasts a high max temperature rating of 100C. Trust in the durability and functionality of this top-of-the-line bundle.
Everything you need, pre-assembled and tested, in one tidy package!
No fan. No dust. No noise.
MiSTer doesn't require active cooling. These kits can be left on 24/7 with any core. Core to core temperature variation is minimal.
The case is the heatsink, dissipating internal heat to the exterior.
Features
| Model | Video Output | SDRAM | AV Port | Analog Video |
| IO Analog Pro* | HDMI AND Analog (simultaneous) | 1 | Saturn | RGB/YPbPr/S-Video+Composite |
| IO Direct* | HDMI OR Analog | 2 | Saturn | RGB/YPbPr/S-Video+Composite |
| IO Analog VGA | HDMI AND Analog (simultaneous) | 1 | VGA | RGB/YPbPr |
Includes
- Aluminum passively cooled case
- DE10-nano
- 128MB SDRAM (1x for Analog Pro, 1 x for Analog VGA and 2x for IO Direct)
- IO Board (Analog Pro, Analog VGA or IO Direct)
- USB Hub, bracket
- DC Jumper
- Power
- IO Analog Pro and IO Direct
- Reflex Volt 1C Power Supply or third party PSU (stock dependent)
- (Bring your own USB C power cable)
- Analog VGA (not available for this batch of cases)
- DC Power supply
- Switch + Splitter
- IO Analog Pro and IO Direct
- 32GB micro SD card with all open source files from Github (cores, operating system, cheats, filters, etc.)
- Higher capacity micro SD cards also available here!
Instructions: https://misteraddons.com/pages/guide
Configuration
Please refer to the MiSTer.ini section of the Guide page
Thermal characteristics
These measurements were performed in 2020, just before the case was released. Since that time, thousands have been sold and used all around the world. Rest assured the case provides both adequate cooling and protection. The FPGA used by the DE10-nano has a max temp rating (TJmax) of 100C. It's an industrial-class device and this aluminum armor is the best enclosure for it.
Troubleshooting
Won't boot?
Remove and reinsert the SD card. Ensure you have a 5V 2A (preferably 3A) power supply connected to the USB-C port in the rear. Use the left button to toggle power on or off.
No HDMI video output?
Set direct_video=0 in MiSTer.ini. If using IO Direct, use the BOTTOM HDMI port (DE10-nano output). The top HDMI port is the input for IO Direct's DAC.
USB devices don't work?
Ensure the rear DC power jumper is installed properly. It is required to route power to USB devices.
Upgrading to a larger SD card?
Use mr-fusion to prepare the new card, then copy your files.
