MiSTer FPGA Pre-configured Bundle (with Aluminum Armor)
Protect your case with Shock+ silicone sleeve!
Experience the superior performance and protection of the MiSTer FPGA Pre-configured Bundle (with Aluminum Armor). Designed with the passionate user in mind, this bundle has already received rave reviews from satisfied customers all over the world. The case is even used by some of your favorite developers! The industrial-grade DE10-nano FPGA boasts a high max temperature rating of 100C. Trust in the durability and functionality of this top-of-the-line bundle.
Everything you need, pre-assembled and tested, in one tidy package!
No fan. No dust. No noise.
MiSTer doesn't require active cooling. These kits can be left on 24/7 with any core. Core to core temperature variation is minimal.
The case is the heatsink, dissipating internal heat to the exterior.
Features
| Model | Video Output | SDRAM | AV Port | Analog Video |
| IO Analog Pro* | HDMI AND Analog (simultaneous) | 1 | Saturn | RGB/YPbPr/S-Video+Composite |
| IO Direct* | HDMI OR Analog | 2 | Saturn | RGB/YPbPr/S-Video+Composite |
| IO Analog VGA | HDMI AND Analog (simultaneous) | 1 | VGA | RGB/YPbPr |
*The "Reset" button is now a power button and is considered experimental. Occasionally the button might double-press, which requires an additional press to toggle power.
All kits can be upgraded to the other IO board by simply replacing the rear panel.
Analog Pro kits no longer include the ADC In port.
Includes
- Silicon port covers and plugs (IO Analog Pro has an extra HDMI opening to make it compatible with IO Direct boards)
- Aluminum passively cooled case
- DE10-nano
- 128MB SDRAM (1x for Analog Pro, 1 x for Analog VGA and 2x for IO Direct)
- IO Board (Analog Pro, Analog VGA or Direct)
- USB Hub, bracket
- DC Jumper
- Reflex Volt 1C Power Supply
- 100W USB PD Power Cable(Analog Pro or Direct)
- Switch + Splitter (Analog VGA)
- 16GB micro SD card with all open source files
- Higher capacity micro SD cards also available here!
Instructions: https://misteraddons.com/pages/guide
Configuration
Please refer to the MiSTer.ini section of the Guide page
Thermal characteristics
These measurements were performed in 2020, just before the case was released. Since that time, thousands have been sold and used all around the world. Rest assured the case provides both adequate cooling and protection. The FPGA used by the DE10-nano has a max temp rating (TJmax) of 100C. It's an industrial-class device and this aluminum armor is the best enclosure for it.
More details here
MiSTer FPGA Pre-configured Bundle (with Aluminum Armor)
Protect your case with Shock+ silicone sleeve!
Experience the superior performance and protection of the MiSTer FPGA Pre-configured Bundle (with Aluminum Armor). Designed with the passionate user in mind, this bundle has already received rave reviews from satisfied customers all over the world. The case is even used by some of your favorite developers! The industrial-grade DE10-nano FPGA boasts a high max temperature rating of 100C. Trust in the durability and functionality of this top-of-the-line bundle.
Everything you need, pre-assembled and tested, in one tidy package!
No fan. No dust. No noise.
MiSTer doesn't require active cooling. These kits can be left on 24/7 with any core. Core to core temperature variation is minimal.
The case is the heatsink, dissipating internal heat to the exterior.
Features
| Model | Video Output | SDRAM | AV Port | Analog Video |
| IO Analog Pro* | HDMI AND Analog (simultaneous) | 1 | Saturn | RGB/YPbPr/S-Video+Composite |
| IO Direct* | HDMI OR Analog | 2 | Saturn | RGB/YPbPr/S-Video+Composite |
| IO Analog VGA | HDMI AND Analog (simultaneous) | 1 | VGA | RGB/YPbPr |
*The "Reset" button is now a power button and is considered experimental. Occasionally the button might double-press, which requires an additional press to toggle power.
All kits can be upgraded to the other IO board by simply replacing the rear panel.
Analog Pro kits no longer include the ADC In port.
Includes
- Silicon port covers and plugs (IO Analog Pro has an extra HDMI opening to make it compatible with IO Direct boards)
- Aluminum passively cooled case
- DE10-nano
- 128MB SDRAM (1x for Analog Pro, 1 x for Analog VGA and 2x for IO Direct)
- IO Board (Analog Pro, Analog VGA or Direct)
- USB Hub, bracket
- DC Jumper
- Reflex Volt 1C Power Supply
- 100W USB PD Power Cable(Analog Pro or Direct)
- Switch + Splitter (Analog VGA)
- 16GB micro SD card with all open source files
- Higher capacity micro SD cards also available here!
Instructions: https://misteraddons.com/pages/guide
Configuration
Please refer to the MiSTer.ini section of the Guide page
Thermal characteristics
These measurements were performed in 2020, just before the case was released. Since that time, thousands have been sold and used all around the world. Rest assured the case provides both adequate cooling and protection. The FPGA used by the DE10-nano has a max temp rating (TJmax) of 100C. It's an industrial-class device and this aluminum armor is the best enclosure for it.
More details here
I’ve been following the FPGA news and advancements from a distance for at least a year. Constantly fighting off the urge the pull the trigger and take the plunge into the MiSTer world. I’ve got tons of retro consoles, PIs and PCs for software emulation, so couldn’t see the need for yet another device.
I saw a one in stock at MiSTer Addons and jumped in. I can’t be more impressed with the MiSTer. I bought the kit with analog VGA, but I’ve only used HDMI thus far, and it looks amazing with all the video configuration possible to add scan lines and other effects to make it look like a CRT. I do have a RetroTink 4k, and will look to buy the right cables to (I think i need an hdmi to vga adapter, then vga to vga to retrotink for the best video signal output from MiSTer based on a youtube i watched, but i need to do more research). At the end of the day though, I am super happy with the output from the MiSTer via hdmi to an lcd (old 80” 1080p lcd) as it stands. I’ve installed (update-all) and tried the arcade cores, tried many of the console cores, and so have been having so much fun with the computer cores. Everything works so well and I’m blown away by the open source community behind this.
If you love retro gaming, and you dont have a MiSTer, you have to ask yourself “Why wouldn’t I have a MiSTer???”
If you do go for it, MiSTer Addons is highly recommended as it has an actual Terasic DE10-nano, high quality/tested/working out the box, and shipping was lighting fast 2 business days.
Next I will be buying a Reflex and SNAX along with all the cables to use my real console controllers.
Welcome to the MiSTer world if you decide to jump in!!
An absolute must have for anyone serious about video game preservation.
I've been on the fence for several years and finally pulled the trigger on an Analog Pro kit after doing some extensive research.
The Mister emulates a staggering amount of devices. I haven't even begun to explore the various PC emulations and have only barely dove I to the Arcade cores (what is there is fantastic). The console cores alone way way justify the purchase. Saturn, PSX, and N64? Heck yes.
If you're worried about not having a CRT monitor, don't jump to conclusions... it looks fantastic on an HD display, particularly on OLED and HDR support. Far better than I had anticipated myself. It has convinced me that maybe I don't even need a CRT.
Now, it's not totally plug and play but if you have any experience with computers, it won't take much to pull up a guide and have it set up in maybe an hour tops. The most time will be spent running updates to pull everything you need. It isn't difficult, but the configuration file is important. Definitely work through it and try to understand the options. Once you do that, it's really quick to just turn it on and get into a game fast.
One other thing I'll say is that the power button on the Analog Pro board may require several pushes to trigger. I initially thought there was something up until read on the Analog Pro IO board product page that this is a know thing and it's experimental in how it's implemented.
Overall, if you're into even just a handful of 32/16/8 bit consoles, this thing is absolutely worth every single penny.
So so so stoked to finally have a MiSTer :) this sort of project is something I would usually just do myself but this time I decided to let someone else handle it, I've been seeing people sing the praises of MiSTer Addons for a long time so I figured why not support someone who is so dedicated to the FPGA community :) Best retro gaming purchase I have ever made hands down. EXTREMELY good customer service from MiSTer Addons. A+
I purchased one of these a couple years ago and through my ignorance didn’t appreciate it. I’m ashamed to say I was a bit rude to the person who runs the site. Later on he allowed me to purchase another one and I have enjoyed the MISTER immensely. I think I’m gonna pick up another one as a gift for my brother-in-law. The gentleman who runs this site deserves admiration.